Navigation Proxy configuration
-
- Messaggi: 3
- Iscritto il: martedì 10 settembre 2019, 20:26
- Località: Egypt
Hi all
my tipo 1.6 e-torq i changed my 5 inch uconnect without GPS to Uconnect 7 with GPS
after replacing the ODO meter start to flashing my and Uconnect 7 has Navigation icon and its working fine,
i had to reconfigure the CAN proxi and its successfully working and ODO meter stop flashing
my Problem is after proxi configration the Navigation icon on my Uconnect 7 disappears and i don't know what to do
Any Help??
my tipo 1.6 e-torq i changed my 5 inch uconnect without GPS to Uconnect 7 with GPS
after replacing the ODO meter start to flashing my and Uconnect 7 has Navigation icon and its working fine,
i had to reconfigure the CAN proxi and its successfully working and ODO meter stop flashing
my Problem is after proxi configration the Navigation icon on my Uconnect 7 disappears and i don't know what to do
Any Help??
-
- Utente
- Messaggi: 11
- Iscritto il: domenica 17 novembre 2019, 22:41
- Località: Como
Hi, unfortunately with the proxy alignment, you have restored the Body Computer...the ODO doesn't flash anymore, but the Body Computer thinks that you don't have the GPS (as per original uconnect 5 you had). A solution is to buy a professional software, for example the software Leonardo Accinni. Through this software you should be able to enable the GPS.
Hope this helps, mate
Hope this helps, mate