Pagina 1 di 4

Profilato gomma

Inviato: giovedì 8 marzo 2018, 18:35
da Jaymz
Ciao everyone,

First let me apologize for not being able to write this in Italian, I hope someone can translate it to reach more people in the forum.

Today I bring you a piece of equipment that our Tipo's lack from factory.

This "profilato gomma" for the hood, only comes with the 1.6 Multijet II with Automatic Transmission (DCT). The ones in the front doors only comes in the HB and SW versions. Sedans gets none of these.

How do you get them?

You have to go to your Fiat dealership and order them with these numbers:

Hood: 52084704 (20 euros)
Doors: 51983887 (6 euros each one)

Prices may differ from country and dealership.

The one for the hood was out of stock for 3 months, the time that took them to produce and ship mine from Turkey to Italy and then to Spain.

Installation is very simple, you just have to introduce the plastic into the holes that the hood has, and then use the sticker that comes with it in the middle.

Immagine

Immagine

Immagine

Re: Profilato gomma

Inviato: giovedì 8 marzo 2018, 18:36
da Jaymz
For the doors, just introduce the plastic in the holes. (Number 2 in the photo)

Immagine

Immagine

To sum it up. If you have a HB or SW without Automatic transmission, you'll need the hood one. If you have a Sedan you'll need all of them.

And that's all. Please feel free to ask in English or Italian. If you need help here I am. etry44

Re: Profilato gomma

Inviato: giovedì 8 marzo 2018, 19:12
da Cremoncello
Grazie mille per tutte le informazioni rtt78trd fgthdfghy6 mi piace molto la guarnizione del cofano motore rtt78trd

Re: Profilato gomma

Inviato: giovedì 8 marzo 2018, 20:11
da Bibi73
Non ho capito bene quello sulle porte a che serve.Se no ricordo male c'è la guarnizione sotto.Domani ci guardo meglio

Re: Profilato gomma

Inviato: giovedì 8 marzo 2018, 20:25
da Traso78
Grazie anche da parte mia per queste info!!!!

Re: Profilato gomma

Inviato: giovedì 8 marzo 2018, 22:32
da Konrad70
In effetti con quella guarnizione sul cofano dovrebbe entrare molta meno polvere nel vano motore, certo che porca miseria queste economie barbine io non le capisco tys
Quindi per prendere questo ricambio da quello che ho capito bisogna rivolgersi per forza ad un officina Fiat?

Re: Profilato gomma

Inviato: giovedì 8 marzo 2018, 22:36
da Jaymz
Konrad70 ha scritto: giovedì 8 marzo 2018, 22:32 In effetti con quella guarnizione sul cofano dovrebbe entrare molta meno polvere nel vano motore, certo che porca miseria queste economie barbine io non le capisco tys
Quindi per prendere questo ricambio da quello che ho capito bisogna rivolgersi per forza ad un officina Fiat?
Si. You have to go to a Fiat dealer and order it with the number from the first message.

It took almost 3 months to arrive, but it should be way faster now that they've made more units.

Re: Profilato gomma

Inviato: giovedì 8 marzo 2018, 22:44
da MarcoT
Bibi73 ha scritto: giovedì 8 marzo 2018, 20:11 Non ho capito bene quello sulle porte a che serve.Se no ricordo male c'è la guarnizione sotto.Domani ci guardo meglio
No, effettivamente sotto gli sportelli anteriori non c'è la guarnizione esterna, sono andato adesso a guardarci.
Sicuramente sono utili per ridurre i fruscii del vento alle alte velocità.

Re: Profilato gomma

Inviato: giovedì 8 marzo 2018, 22:50
da GianlucaM
Grazie mille Jaymiz . Ma tu le hai montate? Ma a cosa servono?
Ma potrebbero aumentare la silenziosità nell'abitacolo? Perché purtroppo una cosa che mi da fastidio è la rumorosità lato guidatore. Io ho una Sedan 1600.
Scusami se scrivo in Italiano.

Inviato dal mio BAH-L09 utilizzando Tapatalk


Re: Profilato gomma

Inviato: giovedì 8 marzo 2018, 23:00
da Jaymz
GianlucaM ha scritto: giovedì 8 marzo 2018, 22:50 Grazie mille Jaymiz . Ma tu le hai montate? Ma a cosa servono?
Ma potrebbero aumentare la silenziosità nell'abitacolo? Perché purtroppo una cosa che mi da fastidio è la rumorosità lato guidatore. Io ho una Sedan 1600.
Scusami se scrivo in Italiano.

Inviato dal mio BAH-L09 utilizzando Tapatalk
I installed only the hood one, my HB already had the door ones. It should increase the silence inside the car yes, especially the door ones.

I'll let you know if the hood ones makes a difference when I get to drive it more.

Don't worry about writing in Italiano, I use the translator rtt78trd
I'm sorry I only know English.

Re: Profilato gomma

Inviato: giovedì 8 marzo 2018, 23:12
da MarcoT
Jaymz ha scritto: giovedì 8 marzo 2018, 18:35
You have to go to your Fiat dealership and order them with these numbers:

Hood: 52084704 (20 euros)
Doors: 51983887 (6 euros each one)

su ePER con il codice 51983887 non è chiaro se ti arriva un solo profilo o due:

Re: Profilato gomma

Inviato: giovedì 8 marzo 2018, 23:13
da GianlucaM
Jaymz ha scritto:
GianlucaM ha scritto: giovedì 8 marzo 2018, 22:50 Grazie mille Jaymiz . Ma tu le hai montate? Ma a cosa servono?
Ma potrebbero aumentare la silenziosità nell'abitacolo? Perché purtroppo una cosa che mi da fastidio è la rumorosità lato guidatore. Io ho una Sedan 1600.
Scusami se scrivo in Italiano.

Inviato dal mio BAH-L09 utilizzando Tapatalk
I installed only the hood one, my HB already had the door ones. It should increase the silence inside the car yes, especially the door ones.

I'll let you know if the hood ones makes a difference when I get to drive it more.

Don't worry about writing in Italiano, I use the translator rtt78trd
I'm sorry I only know English.
Quindi basta che passo in fiat e ordino 4 profili in gomma per la portiera con questo codice? : Doors: 51983887 (6 euros each one)
Ma il codice è uguale anche per la Sedan?

Grazie

Inviato dal mio BAH-L09 utilizzando Tapatalk


Re: Profilato gomma

Inviato: giovedì 8 marzo 2018, 23:22
da Jaymz
GianlucaM ha scritto: giovedì 8 marzo 2018, 23:13
Jaymz ha scritto:
I installed only the hood one, my HB already had the door ones. It should increase the silence inside the car yes, especially the door ones.

I'll let you know if the hood ones makes a difference when I get to drive it more.

Don't worry about writing in Italiano, I use the translator rtt78trd
I'm sorry I only know English.
Quindi basta che passo in fiat e ordino 4 profili in gomma per la portiera con questo codice? : Doors: 51983887 (6 euros each one)
Ma il codice è uguale anche per la Sedan?

Grazie

Inviato dal mio BAH-L09 utilizzando Tapatalk
No, only 2. They are only for the two front doors. And yes, same code for sedan.

Re: Profilato gomma

Inviato: giovedì 8 marzo 2018, 23:23
da Jaymz
MarcoT ha scritto: giovedì 8 marzo 2018, 23:12
Jaymz ha scritto: giovedì 8 marzo 2018, 18:35
You have to go to your Fiat dealership and order them with these numbers:

Hood: 52084704 (20 euros)
Doors: 51983887 (6 euros each one)

su ePER con il codice 51983887 non è chiaro se ti arriva un solo profilo o due:
Maybe ask in your dealership. I can't guarantee if it comes one or two because I haven't ordered that part personally. hdrt78

Re: Profilato gomma

Inviato: giovedì 8 marzo 2018, 23:32
da GianlucaM
Grazie mille di tutte le informazioni, Jaymiz .Domani faccio un salto in Fiat e chiedo

Inviato dal mio BAH-L09 utilizzando Tapatalk


Re: Profilato gomma

Inviato: venerdì 9 marzo 2018, 8:21
da bartek.stec
Grandissimo


Inviato dal mio iPhone utilizzando Tapatalk

Re: Profilato gomma

Inviato: venerdì 9 marzo 2018, 16:41
da Konrad70
L'ho ordinato, 18,50 euro, sono che il magazziniere mi ha detto che non c'è a magazzino e che c'è già una richiesta di reintegro scorte urgente, saranno tutti gli ordini degli utenti del forum che hanno creato un ammanco rtt78trd

Re: Profilato gomma

Inviato: venerdì 9 marzo 2018, 17:18
da Jaymz
Konrad70 ha scritto: venerdì 9 marzo 2018, 16:41 L'ho ordinato, 18,50 euro, sono che il magazziniere mi ha detto che non c'è a magazzino e che c'è già una richiesta di reintegro scorte urgente, saranno tutti gli ordini degli utenti del forum che hanno creato un ammanco rtt78trd
Exactly. Thanks to the German forum I could learn about this. Now I share it with you.

I'm sure it will be much faster than it took to arrive to me.

Re: Profilato gomma

Inviato: venerdì 9 marzo 2018, 17:43
da Konrad70
I hope so, even if this part is not a vital part, I could wait some time.

Re: Profilato gomma

Inviato: venerdì 9 marzo 2018, 18:01
da bartek.stec
Nella mia 5 porte c'è questo pezzo.
Immagine
Ma non quello vano motore

Re: Profilato gomma

Inviato: venerdì 9 marzo 2018, 18:07
da Konrad70
Quello vano motore come ha detto giustamente Jaimz di serie è montato solo sulle versioni con cambio automatico e l'ho anche verificato col magazziniere della Fiat guardando una tipo in showroom che infatti l'aveva mentre la stessa versione di motore e di allestimento però senza cambio automatico non l'aveva ed è rimasto stupito pure lui.

Re: Profilato gomma

Inviato: venerdì 9 marzo 2018, 18:14
da bartek.stec
Konrad70 ha scritto:Quello vano motore come ha detto giustamente Jaimz di serie è montato solo sulle versioni con cambio automatico e l'ho anche verificato col magazziniere della Fiat guardando una tipo in showroom che infatti l'aveva mentre la stessa versione di motore e di allestimento però senza cambio automatico non l'aveva ed è rimasto stupito pure lui.
Chissà perché questa differenza ImmagineImmagineImmagine

Re: Profilato gomma

Inviato: venerdì 9 marzo 2018, 18:18
da Jaymz
bartek.stec ha scritto: venerdì 9 marzo 2018, 18:01 Nella mia 5 porte c'è questo pezzo.
Immagine
Ma non quello vano motore
Sí, only the sedan version doesn't have it.

Re: Profilato gomma

Inviato: venerdì 9 marzo 2018, 18:58
da Bibi73
Vano motore mi sa che lo prenderò..quello portiera non ne vedo il bisogno ,non avendo rumori o altro.....o almeno non li sento

Re: Profilato gomma

Inviato: venerdì 9 marzo 2018, 19:18
da GianlucaM
Passato oggi in Fiat ordinato anch'io quello per le porte .

Mi han detto che ci vorrà 5/6 giorni. La Fiat deve ringraziare Jaymz ed il forum

Unica cosa è che a me hanno chiesto 16 *2 euro. Boh

Inviato dal mio BAH-L09 utilizzando Tapatalk


Re: Profilato gomma

Inviato: venerdì 9 marzo 2018, 19:24
da Cremoncello
Jaymz ha scritto: venerdì 9 marzo 2018, 18:18
bartek.stec ha scritto: venerdì 9 marzo 2018, 18:01 Nella mia 5 porte c'è questo pezzo.
Immagine
Ma non quello vano motore
Sí, only the sedan version doesn't have it.
E ti pareva che non c'è solo sulla berlina......... hjf rtt78trd

Re: Profilato gomma

Inviato: venerdì 9 marzo 2018, 19:41
da GianlucaM
Cremoncello ha scritto:
Jaymz ha scritto: venerdì 9 marzo 2018, 18:18

Sí, only the sedan version doesn't have it.
E ti pareva che non c'è solo sulla berlina......... hjf rtt78trd
Cremo, siamo sempre noi gli sfigati ImmagineImmagine, figli inlegittimi 🤨🤨

Inviato dal mio BAH-L09 utilizzando Tapatalk


Re: Profilato gomma

Inviato: venerdì 9 marzo 2018, 19:48
da TipoMax
interesting, very interesting ... excellent job Jaymz!!

Re: Profilato gomma

Inviato: venerdì 9 marzo 2018, 19:49
da Cremoncello
GianlucaM ha scritto: venerdì 9 marzo 2018, 19:41
Cremoncello ha scritto:
E ti pareva che non c'è solo sulla berlina......... hjf rtt78trd
Cremo, siamo sempre noi gli sfigati ImmagineImmagine, figli inlegittimi 🤨🤨

Inviato dal mio BAH-L09 utilizzando Tapatalk
Per fare un dispetto alla Fiat, vado a ordinare anch'io tutta la serie delle guarnizioni rtt78trd rtt78trd rtt78trd

Re: Profilato gomma

Inviato: venerdì 9 marzo 2018, 19:50
da Jaymz
Cremoncello ha scritto: venerdì 9 marzo 2018, 19:49
GianlucaM ha scritto: venerdì 9 marzo 2018, 19:41 Cremo, siamo sempre noi gli sfigati ImmagineImmagine, figli inlegittimi 🤨🤨

Inviato dal mio BAH-L09 utilizzando Tapatalk
Per fare un dispetto alla Fiat, vado a ordinare anch'io tutta la serie delle guarnizioni rtt78trd rtt78trd rtt78trd
Sergio Marchionne will be able to buy a new sweater thanks to us. fgthdfghy6